CellarPro 4200VSI-B BEER REFRIGERATION SYSTEM, 2177 - Manual (Page 26)

26 V9.14
HUMIDITY: The factory preset for this setting is “3”.
If the humidity inside the cellar is too low, press the
“Set” button, then use the “Up” button until the desired
setting is reached. The recommended range for this
setting is 0-6.
TEMPERATURE DIFFERENTIAL: The factory preset for this
setting is “4”.
This setting determines the Temperature Differential
and therefore the temperature at which the cooling
unit will cycle on. The recommended range for this
setting is 4 or 5.
HIGH TEMPERATURE ALARM: The factory preset for this
setting is “70”.
This setting designates the High temperature inside
the cellar at which the alarm is triggered. We
recommend leaving this setting at the factory preset.
Advanced Operation
CellarPro cooling systems can be programmed with advanced settings to
achieve more control over conditions inside the cellar. Conditions like
humidity, the Temperature Differential, and alarm settings all can be
modified for custom applications. To access the advanced settings, do the
following:
Press the “Set” button and the “Down” button together at the same
time, and hold for three seconds. Then, use the “Up” or “Down” button to
scroll to the following screen:
LOW TEMPERATURE ALARM: The factory preset for this
setting is “45”.
This setting designates the Low temperature inside the
cellar at which the alarm is triggered. We recommend
leaving this setting at the factory preset.
ENERGY SAVINGS MODE DIFFERENTIAL: The factory preset
for this setting is “4”.
This
setting increases or decreases the
Temperature D i f f e r e n t i a l f o r t h e E n e r g y
S a v i n g s M o d e . T h e recommended range for this
setting is 2-4.