Maintenance, Archived 4/2/10 – ETS-Lindgren FP2083 Isotropic Electric Field Probes (Archived) User Manual
Page 21
Isotropic Electric Field Probes
HI-4453/FP5083/FP4083/FP2083
© ETS-LINDGREN L.P. – June 2005
Rev. F, P# H-600064
21
4. MAINTENANCE
This section explains which maintenance tasks can be
performed by the user. It also provides information regarding
replacement and optional parts. If you have any questions
concerning probe maintenance, consult ETS-Lindgren Customer
Service.
MAINTENANCE RECOMMENDATIONS
Maintenance of the HI-4453/FP5083/FP4083/FP4083 probe is
limited to external components such as cables or connectors.
Any calibration or maintenance task that requires probe
disassembly should be performed at the factory. Check with
ETS-Lindgren Customer Service (+1-512-531-6400) before
opening the unit to avoid problems with your probe's warranty.
NOTE: Opening the probe enclosure may void your
warranty. If your system is still under warranty, contact
ETS-Lindgren Customer Service before performing any
maintenance inside the probe.
UPGRADE POLICIES
Periodically, probes are upgraded to enhance functionality.
These upgrades are commonly announced through ETS-
Lindgren Engineering Bulletins.
RETURN PROCEDURES
To return a system or system component, use the following
procedure.
Step 1. Contact ETS-Lindgren Customer Service (+1-512-531-
6400) to obtain an SRO, Service Request Order.
Archived 4/2/10