ETS-Lindgren FP2083 Isotropic Electric Field Probes (Archived) - Manual (Page 7)

Isotropic Electric Field Probes
HI-4453/FP5083/FP4083/FP2083
© ETS-LINDGREN L.P. – June 2005
Rev. F, P# H-600064 7
1. INTRODUCTION
DESCRIPTION
The HI-4453/FP5083/FP4083/FP2083 Electric Field Probes
embody the latest innovations in isotropic sensor design and low
noise, miniaturized electronics. The HI-
4453/FP5083/FP4083/FP2083 probes are fully intelligent sensor
enabling fast and accurate EMF measurements with industry-
leading performance specifications. Optical coupling to a variety
of readout options makes this probe ideally suited for a wide
range of field monitoring applications. The HI-
4453/FP5083/FP4083/FP2083 probes are excellent tools for
electric field mapping, RADHAZ measurements and EMC field
monitoring.
The basic HI-4453/FP5083/FP4083/FP2083 probes are shipped
complete with a 10 meter fiber extension cable, a carrying case,
battery charger and connectors for extending the optic cable.
The HI-4453/FP5083/FP4083/FP2083 probe assembly consists
of a spherical casing, containing the sensor, which is mounted
on one end of a shaft; the other end of the shaft is attached to an
extrusion that houses the electronics (Figure 1). The sensor and
electronics housing operate, and are calibrated, as a unit.
The HI-4453/FP5083/FP4083/FP2083 measures the field
strength in each of three axes. Frequency response of the HI-
4453/FP5083/FP4083/FP2083 is 80 MHz to 40 GHz; dynamic
range is 3 to 300 Volts per meter (V/m).
Archived 4/2/10