Archived 4/2/10 – ETS-Lindgren FP2083 Isotropic Electric Field Probes (Archived) User Manual
Page 55
Isotropic Electric Field Probes
HI-4453/FP5083/FP4083/FP2083
© ETS-LINDGREN L.P. – June 2005
Rev. F, P# H-600064
55
6.0 MAINTENANCE
Electronic instruments are delicate. Operate the battery charger
with care.
User serviceable parts do not exist inside the battery charger.
Warranty may be void if the battery charger housing is opened.
If the battery charger fails to operate, check for a blown fuse
inside the power entry module (refer to figure 2).
NEVER attempt to change the fuse with
the battery charger plugged in.
If a fuse is blown it must be replaced. Be sure to use only 250
Volt, 1.0 Amp, Type T (5 mm x 20 mm).
If the battery charger still fails to operate, or if you have any
questions concerning charging your products, contact ETS-
Lindgren Customer Service.
Archived 4/2/10