ETS-Lindgren FP2083 Isotropic Electric Field Probes (Archived) - Manual (Page 25)

Isotropic Electric Field Probes
HI-4453/FP5083/FP4083/FP2083
© ETS-LINDGREN L.P. – June 2005
Rev. F, P# H-600064 25
5. WARRANTY POLICY FOR
ELECTROMAGNETIC ISOTROPIC
FIELD MONITORING
COMPONENTS
SCOPE AND DURATION OF WARRANTIES
Seller warrants to Buyer that the Holaday Brand Products to be
delivered hereunder will be (1) free from defects in material,
manufacturing workmanship, and title, and (2) conform to the
Seller’s applicable product descriptions and specifications, if any,
contained in or attached to Seller’s quotation. If no product
descriptions or specifications are contained in or attached to the
quotation, Seller’s applicable product descriptions and
specifications in effect on the date of shipment shall apply. The
criteria for all testing shall be Seller’s applicable product
specifications utilizing factory-specified calibration and test
procedures and instruments.
All product warranties, except the warranty of title, and all remedies for warranty
failures are limited in time as shown in the table below.
Product Warranted Duration of Warranty Period
FM5004 3 Years
HI-6005 3 Years
HI-6001 3 Years
HI-4450 3 Years
FP-4080 3 Years
FP-5000 3 Years
FP-2080 3 Years
HI-4453 3 Years
FP-4083 3 Years
FP-5083 3 Years
FP-2083 3 Years
FP-5080 3 Years
FP-4000 3 Years
FP-2000 3 Years
HI-4422 3 Years
Any product or part furnished to Buyer during the warranty period
to correct a warranty failure shall be warranted to the extent of
the unexpired term of the warranty applicable to the repaired or
replaced product.
Archived 4/2/10