Kontron KISS 4U X9SCAF - Manual (Page 14)

7. Product Description KISS 4U V2 – User's Guide (Version 1.01)
The power button of the KISS 4U V2 platform is located on the front side behind the front access panel. The LED indicators
are located on the front side and consist of a “power LED” and a “hard disk activity LED”.
Two of the system fans are installed at the front side of the unit. These are attached to the system by means of a fan
slide-in module. The fan slide-in module simplifies the installation and removal of these components, even during
operation.
The washable filter mat which protects your system against dust and dirt is located on the front side of the system. This
filter mat can be replaced during operation.
The type label is attached to the right side of the device.
The system can be ordered with frontal IP52 protection class.
The KISS 4U V2 platform may only be operated in horizontal position (rack and desktop version) or in
vertical position (tower version).
If you operate the KISS 4U V2 platform in vertical position, please observe that the system fans (slide-in
module) must be to the lower front and the drives to the upper front of the system.
When powering on the KISS 4U V2 system, make sure that the air intake and exhaust openings are not
obstructed by objects.
The frontal IP52 protection class for the KISS 4U V2 platform is ensured only with an additional inserted
steel mesh guard, and with closed front access panel.
www.kontron.com 13