Kontron KISS 4U X9SCAF - Manual (Page 40)

10. Maintenance and Prevention KISS 4U V2 – User's Guide (Version 1.01)
10.1.1. Cleaning Steel Mesh Guard (for IP52 Protection Class only)
If you have ordered a KISS 4U V2 platform with IP52 Protection Class, the filter mat holder (Fig. 42) is fitted with an
additional steel mesh guard (Fig. 43).
10.1 “Cleaning the Filter Mat”. In order to remove the steel mesh guard, follow the steps 1 to 3 of the section
Use a vacuum cleaner or compressed air to remove dust and debris from the steel mesh guard.
Fig. 43) and filter mat (Fig. 41) after cleaning into the filter mat holder (Fig. 39 Reinsert the steel mesh guard ( ). The
positioning of the protective guard and the filter mat in the filter mat holder is shown in Fig. 44.
10.1 “ Reattach the filter mat holder to the front side of the fan slide-in module as described in the section Cleaning the
Filter Mat”, step 7 and 8.
Fig. 42: IP52 - Filter mat holder with inserted steel mesh guard and filte rmat Fig. 43: Steel mesh guard
Fig. 44: IP52 variant - Positioning of the steel mesh guard and of the filter mat in the filter mat holder
The frontal IP52 protection class is ensured for the KISS 4U V2 platform only with an additional inserted
steel mesh guard, and with closed front access panel.
www.kontron.com 39