Kontron KISS 4U X9SCAF - Manual (Page 29)

8. Assembly, Disassembly KISS 4U V2 – User's Guide (Version 1.01)
8.4. Accessing Internal Components
This chapter contains important information on working safely with internal components. Please follow these instructions
when handling cards or replacing system fans.
8.4.1. Installing/Removing the Expansion Cards
When you install (or remove) expansion cards please consider the corresponding safety instruction
included in chapter 4 and the provided document “General Safety Instruction for IT Equipment”.
Activities such as working inside the system or handling the expansion cards have to be carried-out by
qualified personnel for this area.
Before removing the device cover, ensure that your system is switched off and disconnected from the
mains power supply.
Caution:
Energy hazards > 240 VA are present inside the chassis!
Activities such as system expansion with expansion cards, or maintanance have to be carried-out by
qualified personnel familiar with the associated dangers!
Please follow the safety instructions for components that are sensitive to electrostatic discharge (ESD).
Failure to observe this warning notice can result in damage to the device.
Please consult the documentation provided by the manufacturer of the expansion card for instructions
before attempting to install/remove an expansion card into/from your system.
28 www.kontron.com