Kontron KISS 4U X9SCAF - Manual (Page 23)

7. Product Description KISS 4U V2 – User's Guide (Version 1.01)
Fig. 17: Rear side of a KISS 4U V2 platform with Single Board Computer (SBC) and AC wide range PSU
1 “On/Off” switch of the AC PSU (depending on
the integrated power supply unit)
2 AC input connector
3 Ventilation openings of the power supply
4 32 bit or 64 bit free expansion card slots
(depending on the integrated board)
5 Single Board Computer (SBC)
6 Interfaces routed to the rear panel
7 Grounding stud (not marked with PE simbol)
8 Rear side of the cover with captive knurled screws
9 Housing cover
10 Air exhaust openings
11 Externally accessible screw (countersunk screw M3x6) for the
fastening of the retaining bracket
12 Cut-outs for optional (customer-specific) interfaces
(9-pin D-SUB type connector) routed to the rear panel
7.2.1. Interfaces on the Rear Side
The positioning and number of the KISS 4U V2 platform interfaces may vary depending on the system
configuration.
Information and technical data can be found in the corresponding board manual of the installed
motherboard or SBC card.
You can download the relevant board manual for your system configuration from our web site at
www.kontron.com by selecting the product name.
3
8 9 7 1
4 5
10
4 2
11
6 12 6
22 www.kontron.com