Comand, Navigation – Mercedes-Benz S-Class 2012 User Manual
Page 166
X
Confirm the entry with W.
If the selected main category does not
contain any sub-categories, the point of
interest list appears.
If the selected main category contains
subcategories, a list of the subcategories
appears with the input speller.
X
Select a category by turning cVd the
COMAND controller.
X
Confirm the entry with W.
The point of interest list appears. It
contains the points of interest available in
the sub-category that are within the search
radius.
i
Search radius means: COMAND searches
within a radius of 100 km.
If COMAND does not find any points of
interest within this radius, it extends its
search range to approximately 200 km. If
COMAND finds one point of interest within
this radius, it finishes the search.
i
If you select the
ALL
list item, the point of
interest list contains all points of interest
for all subcategories in the
Restaurant
main category which lie within the search
radius.
Point of interest list
Introduction
The illustration below shows an example of
the point of interest list for the
Restaurant
main category in the vicinity of the current
position.
i
Depending on the point of interest
selected, COMAND uses different
reference points in determining the linear
distance to the destination:
R
vicinity of current position: the linear
distance is the distance of the point of
interest from the current vehicle
position.
R
vicinity of destination: the linear distance
is the distance from the destination
entered to the point of interest.
Selecting a point of interest
X
Select a point of interest by turning cVd
the COMAND controller and press W to
confirm.
The complete address of the point of
interest selected is shown.
X
To start route calculation: select
Start
and press W to confirm.
X
To store an address in the destination
memory: select
Save
and press W to
confirm. You can now select storage
options (
X
To show the detailed view: select
Details
and press W to confirm.
X
To make a call: select
Call
and press W
to confirm (only available if the point of
interest contains a telephone book entry
and a telephone is connected to COMAND).
COMAND switches to telephone mode
(
X
To call up the map: select
Map
and press
W to confirm.
X
You can move the map and select the
destination (
ZAGAT
®
Survey service
Entries with the Z icon contain additional
ZAGAT information. ZAGAT rates restaurants,
for instance, in regard to the quality of the
food, furnishing, service, and provides an
average pricing level as well as a general
description.
164
Navigation
COMAND