On-board computer and displays, Display messages – Mercedes-Benz S-Class 2012 User Manual

Page 411

Advertising
background image

Display messages

Possible causes/consequences and M Solutions

Á

Night View Assist

Currently

Unavailable

The temperature of the camera is too high.

X

Wait until you see the

Night View Assist Available

Again

display message.

You can also:

X

Fold the camera cover down (

Y

page 467).

X

Adjust the air distribution of the automatic air conditioning
upwards.

Á

Night View Assist

Lights Must Be Set

to AUTO or ON

A condition for activating Night View Assist Plus has not been
fulfilled.

X

Turn the light switch to c or L.

Á

Night View Assist

Not In Reverse Gear

A condition for activating Night View Assist Plus has not been
fulfilled.

X

Shift the transmission to

P, N or D.

Á

Night View Assist

Lights ON or AUTO,

Not in R Gear

A condition for activating Night View Assist Plus has not been
fulfilled.

X

Turn the light switch to c or L.

X

Shift the transmission to

P, N or D.

Á

Night View Assist

Only When It Is

Dark

You have attempted to activate Night View Assist Plus in the
daytime.
Night View Assist Plus can only be activated when it is dark.

¨

Vehicle Rising

Your vehicle is adjusting to the level you have selected.

¨

Vehicle Rising

Please Wait Briefly

The vehicle level is too low when the vehicle is stationary. A
warning tone also sounds.

X

Do not pull away.
The vehicle level is set when the display message disappears.

¨

STOP Car Too Low

You have pulled away while the vehicle level is still too low.
AIRMATIC sets the vehicle to the selected level after a short
period.

X

Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.

X

Apply the electric parking brake.

X

Wait until the display message disappears before pulling away.

Display messages

409

On-board computer and displays

Z

Advertising
This manual is related to the following products: