Comand, Vehicle – Mercedes-Benz S-Class 2012 User Manual
Page 270
R
change settings for automatic climate
control on the front-passenger side using
COMAND
R
press one of the rocker switches to operate
automatic climate control on the front-
passenger side
R
press one of the rocker switches on the
rear-compartment control panel
Adjusting the footwell temperature
You can use the
Footwell Temperature
function to set the temperature difference
between the footwell and the rest of the
vehicle interior.
i
This setting is quite effective in automatic
mode, especially at low outside
temperatures.
The greater the value you set, the higher the
temperature in the footwell.
X
Select the climate control main menu in the
air-conditioning function bar by turning
cVd the COMAND controller and press
W to confirm.
The climate control menu opens.
X
Select
Footwell Temperature
and press
W.
A scale appears.
X
To change the temperature difference:
slide ZVÆ or turn cVd.
X
To confirm your selection: press W.
Setting the blower settings for the air
vents
This function allows you to determine the way
the air is blown through the air vents in
automatic mode.
You can select:
R
Focused
(high blower setting)
R
Medium
(standard setting)
R
Diffuse
(low blower setting)
i
This setting is quite effective in automatic
mode, especially at high outside
temperatures.
If the vehicle has become very warm and the
automatic air conditioning is cooling the
interior, the blower settings are briefly
canceled.
X
Select the climate control main menu in the
air-conditioning function bar by turning
cVd the COMAND controller and press
W to confirm.
The climate control menu opens.
X
Select
Airflow
and press W.
A menu appears.
The current setting is indicated by a # dot.
X
To change the airflow: slide ZVÆ or turn
cVd.
X
To confirm your selection: press W.
Operating the rear-compartment air-
conditioning system from the front
The rear-compartment air-conditioning
system is operated in the same way as
268
Vehicle
COMAND