Comand, Audio – Mercedes-Benz S-Class 2012 User Manual
Page 221
Option 2
X
Select
Sat. Radio
in the submenu bar by
turning cVd the COMAND controller and
press W to confirm.
X
Select
Enter Channel
and press W to
confirm.
An input menu appears.
X
To enter a channel: irrespective of the
option, press the corresponding number
keys on the control panel one after the
other.
COMAND sets the selected channel.
i
You can only select currently permitted
digits.
Selecting a channel from the SatRadio
channel list
X
Select
Sat. Radio
in the submenu bar by
turning cVd the COMAND controller and
press W to confirm.
X
Select
Channel List
and press W to
confirm.
The channel list appears.
X
Select a channel by turning cVd the
COMAND controller and press W to
confirm.
Memory functions
Storing channels
i
There are ten presets available.
X
Press W the COMAND controller when the
display/selection window is active.
or
X
Select
Presets
in the submenu bar by
turning cVd the COMAND controller and
press W to confirm.
In both cases, the channel presets appear.
The R dot in front of a preset position
indicates that the currently selected
channel is stored there.
X
Select a preset by turning cVd the
COMAND controller and press and hold
W until you hear a tone.
or
X
Press and hold a number button, e.g.
4,
until you hear a tone.
The channel is stored under the preset.
Storing channels automatically
This function automatically stores channels
with adequate reception in the preset
memory. Channels stored manually in the
preset memory will be overwritten.
X
Option 1: press W the COMAND controller
when the display/selection window is
active.
X
Select
Autostore
in the presets by turning
cVd the COMAND controller and press
W to confirm.
X
Option 2: select
Presets
in the submenu
bar by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
X
Select
Autostore
and press W to confirm.
In both cases, COMAND searches for
channels that can be received. You will see
a message to this effect. The available
channels are automatically stored in the
preset positions.
X
To cancel storing: select
Cancel
and
press W to confirm.
Selecting a channel from the preset list
X
To call up the channel list: select
Presets
by turning cVd the COMAND
controller and press W to confirm.
The channel preset list appears.
X
To set a channel: select a preset by
turning cVd the COMAND controller and
press W to confirm.
or
X
Press a number key, e.g.
4.
Audio
219
COMAND
Z