Mercedes-Benz S-Class 2012 - Manual (Page 388)

X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the 9 or : button to select
Day Running Lights .
X Press the a button to confirm.
X To activate/deactivate: press a
again.
Switching Adaptive Highbeam Assist
on/off
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select
Adapt. High-beam Asst. .
X Press the a button to confirm.
X To activate/deactivate: press a
again.
Switching the additional speedometer
on or off
An additional digital speedometer can be
shown in the multifunction display.
Vehicles with a kilometer speedometer: the
digital speedometer has mph units.
Vehicles with a miles speedometer: the digital
speedometer has km/h units.
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press 9 or : to select Add.
Speedometer .
X Press the a button to confirm.
X Press the a button to save the setting.
Selecting the unit of measurement for
distance
The Display Unit Speed-/Odometer:
function allows you to choose whether
certain displays appear in kilometers or miles.
The selected unit of measurement for
distance applies to:
R
the analog speedometer
R the digital speedometer in the Trip menu
R the odometer and the trip odometer
R the trip computer
R
the navigation instruction in the Navi menu
R
DISTRONIC PLUS
R ASSYST PLUS service interval display
The digital speedometer shows alternative
speed units (
Y page 386).
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the 9 or : button to select
Units .
X Press the a button to confirm.
X Press the a button to save the setting.
The unit switches between
km/h and mph .
Switching the belt adjustment on/off
For further information on belt adjustment
(
Y page 60).
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the 9 or : button to select
Belt Adjustment .
X Press the a button to confirm.
X To activate/deactivate: press a
again.
Activating/deactivating the acoustic
locking verification signal
If you activate the Acoustic Lock Feedb.
function, an audible signal sounds depending
on the vehicle's date of manufacture:
R
when locking
or
R
once when unlocking and three times when
locking
386
Menus and submenus
On-board computer and displays