Comand, Audio – Mercedes-Benz S-Class 2012 User Manual

Page 240

Advertising
background image

X

In a directory, press the corresponding
number key once or several times to select
the first letter of the artist's name (e.g. for
an artist beginning with the letter "C", press
number key l three times).
The available letters are listed at the lower
edge of the display.
If the directory only contains folders,
COMAND searches for folders. After a
message, the first entry which matches the
letter entered is shown at the top of the list.
If no entry matches the entered letter, the
first item in the list is the last entry to
correspond to a selection.

Selecting an active partition (USB mass

storage devices only)

You can select this function for USB mass
storage devices when the storage device is
partitioned. Up to four partitions (primary or
logical; FAT format) are supported.

i

The Windows formatting program

supports FAT partitioning up to 32 GB as
standard.

X

Select

Media Interface

in the basic

display by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.

X

Select

Select Active Partition

and

press W to confirm.

Playback options

The following options are available:

R

Normal Track Sequence

Normal track sequence: you hear the
tracks in their normal order (e.g. numerical
or alphabetical).

R

Random Tracks

All the tracks on the medium are played in
random order.

R

Category Mix

or

Random Folder

(for USB

devices if

Folder

has been selected)

The tracks in the currently active category
or folder, including any subfolders, are
played in random order.

i

For USB devices, the random playlists

offer a maximum of 300 tracks chosen at
random.

X

To select a playback option: select

Media Interface

in the basic display by

sliding VÆ and turning cVd the COMAND
controller and press W to confirm.
The options list appears. The # dot
indicates the option selected.

X

Select an option and press W to confirm.

Separate USB connection

In addition to the USB connection on the
Media Interface, there is another USB
connection in the glove box. This connection
can also be used to play audio files.
Electrical consumption at this connection
must not exceed a continuous current of
500 mA. If the electrical consumption is
higher, use a separate source to provide
power for the USB device (e.g.
12 V power supply).

X

To select music from the USB port as
the audio source:
select

Audio

by sliding

ZV and turning cVd the COMAND
controller and press W to confirm.
The audio menu appears.

X

Select

USB

and press W to confirm.

Notes on USB devices

Data formats
The following data formats are supported:

R

MP3: CBR, VBR (up to 320 kbit/s)

R

WMA: CBR, VBR (up to 320 kbit/s)

238

Audio

COMAND

Advertising
This manual is related to the following products: