Lights and windshield wipers, Exterior lighting – Mercedes-Benz S-Class 2012 User Manual

Page 279

Advertising
background image

X

Turn the light switch to $ or c.

or

X

If the rear fog lamp is switched on: press
the light switch in to the stop.

Low-beam headlamps

X

To switch on the low-beam headlamps:

turn the SmartKey in the ignition lock to
position

2 or start the engine.

X

Turn the light switch to L.
The T indicator lamp on the light switch
lights up.

X

To switch off the low-beam

headlamps: turn the light switch to $.

Daytime running lamps

Daytime running lamps in Canada
The daytime running lamps function is
required by law in Canada. It cannot therefore
be deactivated.

X

Turn the light switch to $ or c.
With the engine running: depending on the
ambient light, the daytime running lamps or
the low-beam headlamps are switched on.
When the low-beam headlamps are
activated, the T indicator lamp on the
light switch lights up.

When the engine is running and the vehicle is
stationary or if the electronic parking brake is
applied: if you move the selector lever from a
drive position to

P, the daytime running

lamps/low-beam headlamps go out after
three minutes.
When the engine is running, the vehicle is
stationary and in high ambient light
brightness: if you turn the light switch
to T, the daytime running lamps and the
parking lamps are switched on.
If the engine is running and you turn the light
switch to L, the manual settings take
precedence over the daytime running lamps.

Daytime running lamps in the USA
In the USA, the daytime running lamps are
deactivated upon delivery from the factory.

X

To activate the daytime running

lamps: activate the daytime running lamps

function in the on-board computer
(

Y

page 385).

X

Turn the light switch to $ or c.
With the engine running: depending on the
ambient light, the daytime running lamps or
the low-beam headlamps are switched on.
When the low-beam headlamps are
activated, the T indicator lamp on the
light switch lights up.

If the engine is running and you turn the light
switch to T or L, the manual settings
take precedence over the daytime running
lamps.

Automatic headlamp mode

X

To switch on automatic headlamp

mode: turn the light switch to c.
SmartKey in position

1 in the ignition lock:

the parking lamps are switched on or off
automatically depending on the brightness
of the ambient light.
With the engine running: depending on the
brightness of the ambient light, the daytime
running lamps

12

or the parking lamps and

low-beam headlamps are switched on or off
automatically.
When the low-beam headlamps are
switched on, the T indicator lamp on
the light switch lights up.

G

WARNING

If the light switch is set to c, the low-beam
headlamps will not come on automatically if
it is foggy. This could endanger you and
others. Therefore, turn the light switch to
L in fog.

12

Only if daytime running lamps have been activated via the on-board computer.

Exterior lighting

277

Lights and windshield wipers

Z

Advertising
This manual is related to the following products: