To activate, Board computer, On-board computer and displays – Mercedes-Benz S-Class 2012 User Manual

Page 386: Menus and submenus

Advertising
background image

X

Press the = or ; button on the
steering wheel to select the

DriveAssist

menu.

X

Press the 9 or : button to select

Distance Display

.

X

Press a.
The DISTRONIC PLUS distance display
(

Y

page 339) appears in the multifunction

display.

Deactivating/activating ESP

®

G

WARNING

Under no circumstances should you
deactivate ESP

®

when the ÷ ESP

®

warning lamp in the instrument cluster
flashes. Proceed as follows:

R

when driving off, apply as little throttle as
possible.

R

while driving, ease up on the accelerator
pedal.

R

adapt your speed to suit the prevailing road
and weather conditions.

Failure to observe these guidelines could
cause the vehicle to skid. ESP

®

cannot

prevent accidents resulting from excessive
speed.

For further information about ESP

®

, see

(

Y

page 71).

X

Start the engine.

X

Press = or ; on the steering wheel
to select the

DriveAssist

menu.

X

Press the 9 or : button to select

ESP

.

X

Press the a button.

X

To deactivate: press a again.
The å warning lamp in the instrument
cluster comes on.

G

WARNING

When the å ESP

®

OFF warning lamp is lit,

ESP

®

is deactivated.

If the ÷ ESP

®

warning lamp and the

å ESP

®

OFF warning lamp remain lit,

ESP

®

is not available due to a malfunction.

When ESP

®

is deactivated or not operational,

vehicle stability in standard driving
maneuvers is reduced.
Adapt your speed and driving to the prevailing
road conditions and to the non-operating
status of the ESP

®

.

X

To activate: press a again.
The å warning lamp in the instrument
cluster goes out.

Activating/deactivating PRE-SAFE

®

Brake

PRE-SAFE

®

Brake is only available in vehicles

with DISTRONIC PLUS.

X

Press the = or ; button on the
steering wheel to select the

DriveAssist

menu.

X

Press 9 or : to select

PRE-SAFE

Brake

.

X

Press a.
The current selection is displayed.

X

To activate/deactivate: press a
again.

When PRE-SAFE

®

Brake (

Y

page 73) is

activated, the multifunction display shows
the Ä symbol as long as the HOLD
function is not activated (

Y

page 342).

Activating/deactivating ATTENTION

ASSIST

This function is not available in HYBRID
vehicles.

X

Press the = or ; button on the
steering wheel to select the

DriveAssist

menu.

X

Press the 9 or : button to select

Attention Assist

.

384

Menus and submenus

On-board computer and displays

Advertising
This manual is related to the following products: