Trip computer menu, Menu, Controls in detail – Mercedes-Benz G-Class 2010 Owners Manual User Manual

Page 114: Control system

Advertising
background image

Activating easy-entry/exit feature
Use this function to activate and deactivate
the easy-entry/exit feature (

Y

page 71).

G

Warning!

You must make sure no one can become
trapped or injured by the moving steering
wheel when the easy-entry/exit feature is
activated.
To stop steering wheel movement do one of
the following:

R

Move steering wheel adjustment stalk.

R

Press one of the memory position buttons.

R

Press the memory button.

Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.

X

Press button V or U repeatedly until
the

Settings menu appears in the

multifunction display.

X

Press button &.

X

Move the selection marker with button
W or X to the Convenience
submenu.

X

Press button & or * repeatedly until
the message

Easy-entry Function

appears in the multifunction display.
The selection marker is on the current
setting.

X

Press button W or X to activate (On)
or deactivate (

Off) the easy-entry/exit

feature.

Trip computer menu

Use the

Trip computer menu to call up

statistical data on your vehicle.
The following information is available:

R

Fuel consumption statistics since start
(

Y

page 112)

R

Fuel consumption statistics since last reset
(

Y

page 113)

R

Resetting fuel consumption statistics
(

Y

page 113)

R

Distance to empty (

Y

page 113)

When you enter the

Trip computer menu,

you will always see the fuel consumption
statistics since start first.

Fuel consumption statistics since start

X

Press button U or V repeatedly until
the message

From Start appears in the

multifunction display.

:

Distance driven since start

;

Time elapsed since start

=

Average speed since start

?

Average fuel consumption since start

All statistics stored since the last engine start
will be reset approximately 4 hours after the
SmartKey in the starter switch is turned to
position

0 or removed from the starter switch.

112

Control system

Controls in detail

463_AKB; 3; 35, en-US
d2ureepe,

Version: 2.11.8.1

2009-07-16T20:59:56+02:00 - Seite 112

Advertising