Lumbar support, Controls in detail, Seats – Mercedes-Benz G-Class 2010 Owners Manual User Manual
Page 69
X
Seat fore and aft adjustment: Press the
switch forward or backward in direction of
arrow =.
X
Seat backrest tilt: Press the switch
forward or backward in direction of
arrow ;.
X
Seat height: Press the switch up or down
in direction of arrow A.
X
Seat cushion tilt: Press the switch up or
down in direction of arrow ? until your
upper legs are lightly supported.
X
Head restraint height: Press the switch
up or down in direction of arrow :.
Head restraint fore and aft adjustment
X
Push or pull on the lower edge of the head
restraint cushion to the desired position.
Removing and installing front seat head
restraints
i
Tilt the seat backrest rearward for easier
removal and installation of the head
restraints.
X
Removing: Press switch : upwards and
hold until the head restraint is fully
extended.
X
Pull out the head restraint with both hands.
X
Installing: Press switch : upwards and
hold for about 5 seconds.
X
Insert the head restraint into openings on
the seat backrest.
i
The guide bar with the detent must be on
the left.
X
Push the head restraint down until it
engages.
X
Adjust the head restraint to the desired
position.
You can adjust the contour of the front seat’s
lumbar support to help enhance support to
your spine.
X
Curvature position: Use button : to
move the curvature up and button = to
move it down.
X
Degree of curvature: Use button ; to
lessen the curvature and button ? to
increase it.
Seats
67
Controls in detail
463_AKB; 3; 35, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-16T20:59:56+02:00 - Seite 67
Z