Operation, Driving instructions – Mercedes-Benz G-Class 2010 Owners Manual User Manual

Page 190

Advertising
background image

Crossing obstacles

!

Obstacles can damage the vehicle

underbody or suspension components. If
possible use the assistance of a second
person outside the vehicle to scout the
path you intend to take and check for
adequate ground clearance when you cross
obstacles with your vehicle. The person
assisting you outside the vehicle should
always be a safe distance away from the
vehicle and positioned so that he or she
cannot get hurt in case of any unexpected
vehicle movement.
After off-road driving or crossing obstacles,
inspect vehicle for any damage, especially
vehicle underbody and suspension
components. Failure to do so can adversely
affect the vehicle’s future performance,
including increased chance of an accident.

When driving over tree stumps, big rocks and
other obstacles, observe the following rules:

R

Comply with the warnings (

Y

page 184) and

rules for off-road driving (

Y

page 185).

R

Avoid high engine speeds.

R

Shift automatic transmission into gear
range

1 (

Y

page 92).

R

Check the vehicle clearance before
crossing obstacles.

R

Cross obstacles (e.g. tree stumps or big
rocks) very slowly by aiming one of the front
wheels at the center of the obstacle, and
repeat same with the rear wheel.

!

Special attention is needed when you

cross obstacles on a steep incline.
The vehicle could slide sideways as a result
of its possible slanted position which in turn
may result in the vehicle tipping or rolling
over.

Driving on sand

G

Warning!

Do not reduce the tire inflation pressure
before driving through sand. However, if you
do so, remember to correct the tire inflation
pressure before continuing your trip. Driving
with reduced tire inflation pressure increases
the risk of losing control of the vehicle and
rolling over.

When driving on sand, observe the following
rules:

R

Avoid high engine speeds.

R

Shift automatic transmission into a gear
range that is appropriate for the terrain.

R

In sandy soil, drive at a steady speed as
conditions permit. This helps overcome the
vehicle rolling resistance and reduce the
likelihood of the vehicle sinking into the
ground.

R

Drive in tracks of other vehicles if they are
not too deep and you have sufficient
clearance.

Ruts

A number of off-road tracks or other byways
have deep ruts which can cause the
underbody to come in contact with the
ground.

!

Check that the ruts are not too deep and

your vehicle’s clearance is sufficient.
Otherwise:

R

your vehicle may be damaged

R

the underbody of the vehicle may come
in contact with the ground and you may
get stuck

188

Driving instructions

Operation

463_AKB; 3; 35, en-US
d2ureepe,

Version: 2.11.8.1

2009-07-16T20:59:56+02:00 - Seite 188

Advertising