Cargo compartment cover blind, Front storage compartments, Blind, if installed – Mercedes-Benz G-Class 2010 Owners Manual User Manual
Page 134: Controls in detail, Loading and storing
The cargo compartment cover blind can be
installed behind the rear seat bench.
!
With the cargo compartment cover blind
installed, do not pile luggage higher than
the lower edges of the rear side windows.
X
Rolling out: Grip the blind strap and pull
cargo compartment cover blind :
rearward across the cargo compartment.
X
Engage cargo compartment cover
blind : into the mounts to the left and
right of the tailgate.
X
Rolling up: Disengage cargo compartment
cover blind : from the mounts and guide
retraction.
X
Removing: Roll up cargo compartment
cover blind =.
X
Open latch ; on the right and left side of
cargo compartment cover blind = in
direction of the arrow.
X
Pull cargo compartment cover blind = out
upwards.
X
Installing: Open latch ; on the right and
left side.
X
Place cargo compartment cover blind =
into recesses.
X
Press the right and left side of cargo
compartment cover blind = down until it
locks into place.
X
Close latch ; on the right and left side.
To help avoid personal injury during a collision
or sudden maneuver, exercise care when
storing objects in the vehicle. Put luggage or
cargo in the cargo compartment if possible.
Do not pile luggage or cargo higher than the
seat backrests.
Keep compartment lids closed. This will help
to prevent stored objects from being thrown
about and injuring vehicle occupants during
R
braking
R
vehicle maneuvers
R
an accident
Do not load items on the roof. It may cause
instability during some maneuvers which
could result in an accident.
Glove box
An media interface is located in the glove box.
For information on media interface, see
separate COMAND system operating
instructions.
132
Loading and storing
Controls in detail
463_AKB; 3; 35, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-16T20:59:56+02:00 - Seite 132