Air recirculation mode, Residual heat and ventilation, Controls in detail – Mercedes-Benz G-Class 2010 Owners Manual User Manual

Page 128: Climate control system

Advertising
background image

X

Activating: Press button ¥

4

or z

5

.

The indicator lamp in the button comes on.

The climate control switches to the following
functions automatically:

R

cooling on to dehumidify

R

most efficient blower speed and heating
power, depending on outside temperature

R

air flows onto the windshield and the front
door windows

R

the air recirculation mode is switched off

i

If you have activated on the defrost

function with button ¥ or z, you
cannot make any other settings.

X

Deactivating: Press button ¥ or z
again.
The indicator lamp in the button goes out.
The previous settings are once again in
effect.

Windshield fogged on the outside

X

Switch the windshield wipers on
(

Y

page 82).

If the automatic mode of the climate control
is switched off:

X

Turn air distribution control to position
P or O.

Air recirculation mode

Switch to air recirculation mode to prevent
unpleasant odors from entering the vehicle
from the outside (e.

g. before driving through

a tunnel). This setting cuts off the intake of
outside air and recirculates the air in the
passenger compartment.

G

Warning!

Fogged windows impair visibility,
endangering you and others. If the windows
begin to fog on the inside, switching off the

air recirculation mode immediately should
clear interior window fogging. If interior
window fogging persists, make sure the air
conditioning is activated, or press button
z or ¥.

X

Activating: Press button g.
The indicator lamp in the button comes on.

i

The air recirculation mode is activated

automatically at high outside
temperatures.
The indicator lamp in button g is not lit
when the air recirculation mode is switched
on automatically.
If the air conditioning has been turned off
or the outside temperature is below 41‡
(5†), the air recirculation mode will not
switch on automatically.
A quantity of outside air is added after
approximately 30 minutes.

X

Deactivating: Press button g again.
The indicator lamp in the button goes out.

i

The manually selected air recirculation

mode is deactivated automatically:

R

after 5 minutes if the outside
temperature is below approximately
41‡ (5†)

R

after 5 minutes if the air conditioning is
turned off

R

after 30 minutes if the outside
temperature is above approximately
41‡ (5†)

Residual heat and ventilation

With the engine turned off, it is possible to
continue to heat or ventilate the interior for
up to 30 minutes. This feature makes use of
the residual heat produced by the engine.

4

USA only

5

Canada only

126

Climate control system

Controls in detail

463_AKB; 3; 35, en-US
d2ureepe,

Version: 2.11.8.1

2009-07-16T20:59:56+02:00 - Seite 126

Advertising