Driving systems, Introduction, Cruise control – Mercedes-Benz G-Class 2010 Owners Manual User Manual
Page 117: Controls in detail
The control system stores the dialed
number in the redial memory.
or
X
Press button ~ if you do not want to
make the call.
Redialing
The control system stores the most recently
dialed phone numbers. This eliminates the
need to search through your entire phone
book.
X
Press button U or V repeatedly until
the message
TEL appears in the
multifunction display.
X
Press button 6.
The first number in the redial memory
appears in the multifunction display.
X
Press button & or * repeatedly until
the desired number or name appears in the
multifunction display.
X
Press button 6.
The control system dials the selected
phone number.
Driving systems
R
Cruise control
R
Hill-start assist system
R
All-wheel drive (4MATIC)
R
Rear Parking Assist
R
Rear view camera
The driving safety systems ABS, BAS, EBB,
ESP
®
and 4-ETS are described in the “Safety
The cruise control maintains the speed you
set for your vehicle automatically.
The use of the cruise control is recommended
for driving at a constant speed for extended
periods of time.
The currently set speed or last set speed
(“Resume” function) appears in the
multifunction display for approximately
2 seconds.
i
The cruise control should not be activated
during off-road driving.
The cruise control is a convenience system
designed to assist the driver during vehicle
operation. The driver is and must always
remain responsible for the vehicle’s speed
and for safe brake operation.
Only use the cruise control if the road, traffic,
and weather conditions make it advisable to
travel at a constant speed.
R
The use of the cruise control can be
dangerous on winding roads or in heavy
traffic because conditions do not allow safe
driving at a constant speed.
R
The use of the cruise control can be
dangerous on slippery roads. Rapid
changes in tire traction can result in wheel
spin and loss of control.
R
Deactivate the cruise control when driving
in fog.
The “Resume” function should only be
operated if the driver is fully aware of the
previously set speed and wishes to resume
this particular preset speed.
Driving systems
115
Controls in detail
463_AKB; 3; 35, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-16T20:59:56+02:00 - Seite 115
Z