Controls in detail, Lighting – Mercedes-Benz G-Class 2010 Owners Manual User Manual

Page 78

Advertising
background image

Canada only: High-beam headlamps are only

available with the exterior lamp switch in
position L.

Daytime running lamp mode

In Canada, the daytime running lamp mode is
mandatory and therefore in a constant mode.
In the USA, the daytime running lamp mode
is deactivated by default.

X

Activate the daytime running lamp mode
using the control system, see “Switching
daytime running lamp mode on or off (USA
only)” (

Y

page 109).

X

Turn the exterior lamp switch to position
$ or Ã.
When the engine is running, the low-beam
headlamps come on.
In low ambient lighting conditions, the
following lamps will come on additionally:

R

Tail lamps

R

Parking lamps

R

License plate lamps

R

Side marker lamps

With the daytime running lamp mode
activated and the engine running, you cannot
switch off the low-beam headlamps manually.

Canada only
With the exterior lamp switch in position
$ or Ã, you cannot switch on the
high-beam headlamps.
The high-beam flasher is available at all times.

X

For nighttime driving turn the exterior lamp
switch to position L to permit activation
of the high-beam headlamps.

When the engine is running, and you

R

shift from a driving position to neutral
position

N or park position P with the

vehicle at a standstill, the low-beam
headlamps will go out with a delay of
3 minutes

R

turn the exterior lamp switch to position
T, the low-beam headlamps, the tail

and parking lamps, the license plate lamps
and the side marker lamps come on

R

turn the exterior lamp switch to position
L, the manual headlamp mode has
priority over the daytime running lamp
mode
The corresponding exterior lamps come on
(

Y

page 74).

USA only
In bright ambient lighting conditions you can
switch on the high-beam headlamps with the
exterior lamp switch in position L.
In low ambient lighting conditions you can
switch on the high-beam headlamps with the
exterior lamp switch in position $, Ã
or L.
The high-beam flasher is available at all times.

X

For nighttime driving turn the exterior lamp
switch to position L to permit activation
of the high-beam headlamps.

When the engine is running, and you turn the
exterior lamp switch to position T or
L, the manual headlamp mode has
priority over the daytime running lamp mode.
The corresponding exterior lamps come on
(

Y

page 74).

Fog lamps

Fog lamps cannot be switched on with the
exterior lamp switch in position Ã.

G

Warning!

In low ambient lighting or foggy conditions,
only switch from position à to L with
the vehicle at a standstill in a safe location.
Switching from à to L will briefly
switch off the headlamps. Doing so while
driving in low ambient lighting conditions may
result in an accident.

Fog lamps will operate with the parking lamps
and/or the low-beam headlamps on. Fog
lamps should only be used in conjunction with
low-beam headlamps. Consult your State or

76

Lighting

Controls in detail

463_AKB; 3; 35, en-US
d2ureepe,

Version: 2.11.8.1

2009-07-16T20:59:56+02:00 - Seite 76

Advertising