Mercedes-Benz G-Class 2010 Owners Manual - Manual (Page 76)

Each memory position button on the driver’s
side can store all of the following settings:
R
Seat position
R
Multicontour seat: previously saved
settings
R
Steering wheel position
R
Exterior rear view mirrors’ position
G Warning!
Do not activate the memory function while
driving. Activating the memory function while
driving could cause the driver to lose control
of the vehicle.
Each memory position button on the front
passenger side can store all of the following
settings:
R Seat position
R Multicontour seat: previously saved
settings
Storing positions into memory
X Adjust the seats.
X On the driver’s side, also adjust the
steering wheel and exterior rear view
mirrors to the desired positions.
X Press memory button ; once and within
3 seconds press one memory position
button :
1, 2 or 3.
All settings are stored to the selected
position.
Recalling positions from memory
X Press and hold desired memory position
button
1, 2 or 3 until the seat has moved
to the stored position completely. On the
driver’s side, also wait for the steering
wheel and exterior rear view mirrors to
move to the stored position.
i Releasing the memory position button
stops movement to the stored positions
immediately.
Lighting
Notes
i If you drive in countries with left-hand
driving, you must have the headlamps
modified for symmetrical low beams.
Relevant information can be obtained at
any authorized Mercedes-Benz Center.
Exterior lamp switch
1 W
Standing lamps, left
2 X Standing lamps, right
3 $
Off
Daytime running lamp mode
4 Ã Automatic headlamp mode
Daytime running lamp mode
5 T
Parking lamps (also tail lamps,
license plate lamps, side marker
lamps and instrument panel lamps)
6 L
Low-beam headlamps or high-beam
headlamps
74
Lighting
Controls in detail
463_AKB; 3; 35, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-16T20:59:56+02:00 - Seite 74