Mercedes-Benz SLK-Class 2009 COMAND Manual - Manual (Page 153)

Audio Aux
An external audio source (Aux) can be
connected to COMAND via the 1/8 inch jack
1 located inside the glovebox.
Switching to Audio Aux Mode
From Another Main Function
X Select Audio£Audio£Aux in the audio
menu display.
i If the last mode was audio AUX mode, you
only need to select Audio.
Within the Audio Function
X Select Audio£Aux.
The Audio Aux menu appears. The medium
in the external audio source is heard,
provided it is connected and switched to
playback.
i Please see the corresponding operating
instructions for how to operate the external
audio source.
You can set the following in audio Aux mode:
R
Volume ( Y page 32)
R
Balance and fader ( Y page 33)
R
Treble and bass ( Y page 32)
R
Surround sound ( Y page 33)
G
Warning
Due to the different volumes of the external
audio sources, system messages (e.g.
navigation announcements) may be much
louder. You may need to disable these system
messages or adjust the volume of these
messages manually.
i The volume of external audio sources is
extremely variable. It is possible that a
device connected as an external audio
source will sound quieter or louder in the
vehicle or that the usual maximum volume
cannot be achieved. On certain devices the
volume can be set separately. In this case,
start at a moderate volume and increase it
slowly. In this way, you can determine
whether the system is capable of playback
without distortion, even at high volume.
Audio Aux
151
Audio
Z