Mercedes-Benz SLK-Class 2009 COMAND Manual - Manual (Page 83)

i Depending on the basic setting selection
in "Information on map" you will see in 4
R
Information on "Arrival time/distance”
R
Road currently being driven down
R
Geo-coordinate display.
If you have selected the None menu item,
the display is hidden.
Announcement Phase
COMAND announces the imminent driving
maneuver. Based on the example display
shown below, the announcement is made
900 ft. ahead of the driving maneuver using
Please turn right in 900 ft. and
follow the ’road name’.
i The announced distance to the maneuver
depends on the class of road and its speed
limit.
The display is now split into two sectors. In
the left half, you see the normal map view.
The right side shows an enlarged section of
the area around the junction (Crossing Zoom)
or a 3D image of the road's course with the
route indicating the next maneuver.
The example illustrated below shows the
junction zoom in the right-hand half.
1 Next road to be taken
2 Point at which the driving maneuver takes
place (light-blue dot, shown in the left-
hand and the right-hand display)
3 Visual distance indicator to the driving
maneuver
4
Driving maneuver (turn right here)
5 Distance information to the driving
maneuver
6 Route (highlighted in blue, shown in the
left-hand and right-hand display)
i The solid part of the visual distance
indicator 3 reduces from bottom to top as
the announced driving maneuver gets
closer.
Maneuver Phase
COMAND announces the imminent change of
driving maneuver. Based on the example
display below, the announcment is made 90
ft. ahead of the driving maneuver using Now
turn right. The display is split into two
halves, as in the announcement phase.
1 Current vehicle location, tip of the triangle
points in the vehicle’s direction of travel
2 Visual distance indicator to the next
driving maneuver
3
Distance information to the driving
maneuver
Once the driving maneuver is complete,
COMAND will automatically switch back to
full-screen display.
Route Guidance
81
Navigation
Z