Mercedes-Benz SLK-Class 2009 COMAND Manual - Manual (Page 188)

Starting the Dialog
X Switch on the ignition (see the vehicle
Owner's Manual).
X Vehicles with Voice Control buttons on
the Multi-function Steering Wheel: Press
the ? button.
or
X Vehicles with Lever for Voice Control:
Pull the lever toward you
An acoustic signal confirms that the dialog
has been started.
X Give a command.
Interrupting the Dialog
If a list appears on the display, you can use
the “Pause” command to interrupt the dialog.
You can then select an entry using the
COMAND control panel.
To resume the dialog with voice control, press
the ? button on the multifunction steering
wheel.
Canceling the Dialog
X Vehicles with Voice Control buttons on
the Multi-function Steering Wheel: Press
the % button.
or
X Vehicles with Lever for Voice Control:
Push the lever away from you.
An acoustic signal confirms that the dialog
has been started.
or
X Say the command “Cancel” (except when
creating and storing voice tags, navigation
entries or during individualization).
or
X Press any button on COMAND.
Adjusting the Volume
X Start the dialog.
X Give a command, e.g. “Help”.
X Press the W or X button.
The volume increases or decreases during
voice output.
or
X Set the volume for the voice output on the
volume control for COMAND.
Display Messages
The audible help function can be
supplemented by visual help on the display
(
Y page 41). If the help function is switched
on, the most important commands that are
currently possible appear in the display when
you start the dialog.
In the address book and navigation system, a
selection list is shown in the display if voice
control requires additional information from
you.
1 Display
Entering Numbers
R
Digits from “zero” to “nine” are permitted.
R
Say the phone number in groups of three
to five digits.
Spell
R
The letters of the alphabet and the numbers
0 to 9 are permitted.
R
Say the letters in groups of five to seven
letters.
R
Say each individual letter clearly.
186
Overview
Voice Control