Mercedes-Benz SLK-Class 2009 COMAND Manual - Manual (Page 157)

R
The discs must only be labelled using pens
specially designed for this purpose.
R
After use, replace the discs into the sleeve.
R
Protect the discs from heat and direct
sunlight.
DVD Playback Conditions
Some DVDs may not comply with the NTSC
or PAL TV playback standards. Sound, picture
and other playback problems may occur
when you play such DVDs.
As standard, COMAND can play video DVDs
which meet the following criteria:
R
Region code 1 or region code 0 (no region
code)
i With a video DVD having another region
code, a corresponding message will be
displayed.
R
PAL or NTSC TV standard
Information on this can usually be found
either on the DVD itself or on the DVD sleeve.
i The factory setting for COMAND is region
code 1. An authorized Mercedes-Benz
Center can change this setting. This will
enable you to play video DVDs with other
region codes, provided that they have been
made to the PAL or NTSC TV standard.
Functional Restrictions
It may be the case that some functions or
actions may not be possible at certain times,
or may not be possible in general, depending
on the DVD.
When you activate such functions or actions,
this is indicated by the 7 in the display.
Loading a DVD
X Proceed as described in the "Loading CDs
and DVDs" section (
Y page 132).
Ejecting a DVD
X Proceed as described in the "Ejecting CDs
and DVDs" section (
Y page 134).
General Information
155
Video
Z