Mercedes-Benz SLK-Class 2009 COMAND Manual - Manual (Page 88)

Route Browser
i The route browser provides an overview
of the route. You can move along the route
segment by segment using the route
browser and view information and details
about the route segments.
X In the map display with the menu system
displayed, select Route£Route
Browser.
The route browser is in the display.
The top of the display shows information on
the highlighted route segment, e.g. the
road and the segment of the road to be
driven.
The highlighted route segment is identified
on the map by its white color and red edge.
X To display next or previous route
segment: Select Next or Previous.
X To enlarge or reduce the map display:
Select ; or :.
X To close route browser: Select Back.
Displaying Destination Information
X In the map display with the menu system
shown, select Route£Destination
Information.
The destination information is given in the
display.
Example display with main destination and
stopover destination
1
Distance/estimated time of arrival/
estimated journey time to the stopover
destination
2 Stopover destination =
3 State and City
4 Main destination <
5 Distance/estimated time of arrival/
estimated journey time to the main
destination
i When calculating the estimated time of
arrival, COMAND uses the time set on the
COMAND as its basis. For this reason, the
time on COMAND must be set correctly .
The calculation of the estimated time of
arrival does not specifically take into
consideration whether it is summer time or
standard time at the destination. It is not
taken into consideration whether or not the
destination is in a different time zone. The
distance to the destination, the estimated
time of arrival and the estimated remaining
journey time 1, 5 are not displayed until
the route calculation is complete.
X To close the destination information:
Press ; or =.
or
X Press the k button.
86
Route Guidance
Navigation