Mercedes-Benz SLK-Class 2009 COMAND Manual - Manual (Page 29)

R
If the mobile phone has not yet been
authorized, the message in the
multifunction display is: BLUETOOTH
READY.
R
If the mobile phone is switched on and
authorized, the message in the
multifunction display is: READY.
Answering a Call
When your mobile phone is ready to receive
calls, you can answer a call at any time. In the
multifunction display you will see a
corresponding message or, if available, the
caller ID (name and number):
X Press button 6.
You have answered the call.
Ending a Call or Rejecting an Incoming Call
X Press button ~.
Dialing a Number from the Phone Book
If your mobile phone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
X Press button V or U repeatedly until
the TEL menu appears in the multifunction
display
X Press button * or & repeatedly until
the desired name or number appears in the
multifunction display.
X To scroll through the list of names or
numbers using the quick search mode:
Press and hold button * or & for
longer than one second.
The system scrolls rapidly through the list
of names or numbers until you release the
button.
The stored names are displayed in
ascending or descending alphabetical
order.
X To cancel the quick search mode: Press
button ~
i If no contacts have been downloaded
from the mobile phone, No entries
appears in the multifunction display when
* or & is pressed.
X Press button 6.
The system dials the selected phone
number.
If the connection is successful and this
feature is supported by your network
provider, the name of the party you are
calling (if stored in your phone book) will
appear in the multifunction display.
If no connection is made, the control
system stores the dialed number in the
Calls dialed memory.
Redialing
The control system stores the most recently
dialed phone numbers. This eliminates the
need to search through your entire phone
book.
X Press button V or U repeatedly until
the TEL menu appears in the multifunction
display.
You will see the Ready message.
X Press button 6.
In the multifunction display you see the first
number in the Calls dialed memory.
X Press button * or & repeatedly until
the desired name appears in the
multifunction display.
X Press button 6.
The control system dials the selected
phone number.
Multifunction Steering Wheel
27
At a Glance
Z