Mercedes-Benz SLK-Class 2009 COMAND Manual - Manual (Page 201)

s Number four
t Number four accepted
The system opens the fourth entry on
the list.
If the selected entry contains at least
one phone number or an address,
voice control asks whether you want
to dial the number or navigate to the
stored address.
i You can use the “Next page” or “Previous
page” commands to scroll through the list.
You can use the “Correction” command to
spell the name again.
Radio and Satellite Radio
G Warning!
Please devote your attention first and
foremost to the traffic situation you are in.
Before your journey, please familiarize
yourself with the radio functions.
Only use the Voice Control System when road
and traffic conditions permit you to do so.
Otherwise you could be involved in an
accident in which you or others could be
injured.
Operation
You can use voice control to:
R
select the waveband
R
find a station
R
select a frequency (FM, AM)
R
select a category (Satellite radio)
R
listen to the station list
R
save a voice tag for a station
R
delete a station list (voice tags only)
R
delete a station (voice tag only)
R
select a channel number (Satellite radio)
The names of all received and stored stations
are available for voice recognition. To
improve voice recognition, you can store a
voice tag for a specific speaker.
To select the radio or satellite radio
application:
X Vehicles with Voice Control buttons on
the Multi-function Steering Wheel: Press
the ? button on the multifunction
steering wheel.
or
X Vehicles with Lever for Voice Control:
Pull the Voice Control lever toward you
X Say the command Radio or Satellite
Radio.
X Vehicles with Voice Control buttons on
the Multi-function Steering Wheel: Press
the ? button on the multifunction
steering wheel.
or
X Vehicles with Lever for Voice Control:
Pull the Voice Control lever toward you
X Say one of the radio or satellite radio
commands explained below.
Commands
You can always give the commands for the
radio when you are listening to the radio, even
if a different application is shown on the
display.
“Help Radio”
Using the “Help Radio” command, you can
have all the commands for the radio read out.
“Help Satellite Radio”
Using the “Help Satellite Radio” command,
you can have all the commands for the
satellite radio read out.
Selecting a Waveband
You can set the waveband with the following
commands:
Radio and Satellite Radio
199
Voice Control
Z