0 configuring the network settings, Configuring the network settings – Rice Lake 880 Performance Series Panel Mount Indicator/Controller - ProfiNet Interface Option Installation and Programming Manual User Manual
Page 13
Configuring the Network Settings
9
3.0
Configuring the Network Settings
Configuring the network settings can be done using a web browser or the Anybus IP
configuration utility.
Open a browser and type the IP address of the card in the address bar. Default
xxx.xxx.xxx.xxx. Change any or all the setting and then click on the Store
configuration button.
Figure 3-1. ProfiNet Configuration Screen Using your Web Browser
To set the network settings using the Anybus IP Configuration program:
1.
Open the Configuration program found on the CD.
2.
Click on the
Scan
button if the device does not appear in the window.
3.
Once the device is found, double-click on the device found in the window.
4.
A window will be displayed with the current network settings.
5.
Change any or all settings and click on the
Set
button.