Rice Lake 880 Performance Series Panel Mount Indicator/Controller - ProfiNet Interface Option Installation and Programming Manual - Manual (Page 3)

Contents i
Contents
About This Manual ................................................................................ 1
1.0
Introduction............................................................................... 1
2.0 Installation ................................................................................ 2
2.1 Installing the ProfiNet Interface . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.2 ProfiNet Network Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.3 LED Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.0 Configuring the Network Settings ............................................ 9
4.0 Commands .............................................................................. 10
4.1 Output Data Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.1.1 BYTE Swapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.2 Input Data Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.2.1 Command number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.2.2 Status Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.2.3 Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.2.4 Setting a Float Value: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.2.5 Reading a Float Value: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.3 Command Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.0 ProfiNet Interface Specifications ........................................... 22
ProfiNet Interface Limited Warranty................................................... 23
Technical training seminars are available through Rice Lake Weighing Systems.
Course descriptions and dates can be viewed at www.ricelake.com/training
or obtained by calling 715-234-9171 and asking for the training department.
© Rice Lake Weighing Systems. All rights reserved. Printed in the United States of America.
Specifications subject to change without notice.
Rice Lake Weighing Systems is an ISO 9001 registered company.
Version 1.0 May 07, 2014