0 profinet interface specifications, Profinet interface specifications – Rice Lake 880 Performance Series Panel Mount Indicator/Controller - ProfiNet Interface Option Installation and Programming Manual User Manual
Page 26
22 ProfiNet Installation and Programming Manual
5.0
ProfiNet Interface Specifications
Power Requirements
Bus Adapter Card with ProfiNet Module, DC Power:
Supply voltage:
6 VDC
Typical current draw: 270 mA
Power consumption: 1.62 W
Indicators, Typical AC Load:
880
Power (TRMS): 3.51 W
Current (TRMS):33.7 mA
Communications Specifications
ProfiNet Network Communications:
Twisted-pair cabling up to 100Mbits/s
Update rate is dependent on the configured baud rate and the number of network nodes.
Maximum update rates are:
880:
up to 120 updates/sec
Environmental Specifications
Temperature:
–10° to +40° C (14° to 104° F)
Conformance
The ProfiNet Interface has been tested by ODVA’s independent test lab and found to
comply with the ODVA composite conformance test, revision 17.
Complies with Profinet IO conformance class B