Rice Lake 920i FlexWeigh Systems - 103 - Manual (Page 12)

8 System 103 Loss-in Weight Dispensing Controls
3.2 Setting the System Time and Date
Use the following steps to set up the system time and date.
1. From the Main Setup Menu Screen , press the Time/Date softkey.
Figure 3-3. Select Time/Date Softkey
2. Use the arrow keys and the numeric keypad on the 920i (Figure 1-1 on page 3) to modify the time and or
date.
3. Press the enter key to save your settings.
Figure 3-4. Time and Date Main Screen
The Cancel softkey can be pressed at any time to exit this sequence without saving any changes.
05/20/2011 02:15PM SCALE #1
ID #1 More =>
Setup Menu
_ _ _ _ _
SCALE #1
Gross
Lb
Time/Date
Program: Express 103 PN120598 (V 1.00)
ID #1 (disabled) Start O Refill Cmpt
ID #2 (disabled) Resume O Disp Cmpt
Single-Speed (enabled) Reset O Slow Cycle
Auto Print (disabled) Stop O Disp Slow
Delay After Discharge (sec) 3.0 Refill Disp Fast
Setup Menu
Setup
Password
ID #2
Cancel
03:57 PM
05/20/2011
Note