Rice Lake 920i FlexWeigh Systems - 103 - Manual (Page 13)

Modifying the Setup Password 9
3.3 Modifying the Setup Password
Use the following steps to modify the setup password.
1. From the Main Setup Menu Screen , press the Setup Password softkey (Figure 3-2). The system prompts,
Enter New Password .
Figure 3-5. Enter New Password
2. Enter the new password and press the enter key. The system prompts Re-enter password to verify.
3. Re-enter the password and press the enter key again. The system performs one of the following actions.
• If the passwords match, the system displays Password Changed.
• If the passwords do not match, the system displays Passwords Did Not Match and exits the operation.
3.4 Enabling/Disabling Additional Data Fields
Use the following steps to enable or disable additional data fields.
1. From the Main Setup Menu Screen , press the Setup Password softkey (Figure 3-2).
2. Press the ID #1 or ID #2 softkey. The system displays Enable Extra Data #1 or Extra Data #2 while displaying
Yes or No softkeys.
Figure 3-6. Enabling ID’s
3. The operator does one of the following.
Press the Yes softkey, the system prompts Enter ID#1 Name . Enter the name using the alpha keypad (press
the UP arrow to access), and press the enter key on the 920i. A new data field appears on the main display
and as a softkey so that the operator can change it.
Press the Yes softkey and this returns the operator back to Step 1.
05/20/2011 02:15PM SCALE #1
Cancel End
Enter New Password
=>
_ _ _ _ _
SCALE #1
Gross
Lb
Home
Program: Express 103 PN120598 (V 1.00)
ID #1 (disabled) Start O Refill Cmpt
ID #2 (disabled) Resume O Disp Cmpt
Single-Speed (enabled) Reset O Slow Cycle
Auto Print (disabled) Stop O Disp Slow
Delay After Discharge (sec) 3.0 Refill Disp Fast
Setup Menu
05/20/2011 02:18PM SCALE #1
No
Enable ID #1
_ _ _ _ _
SCALE #1
Gross
Lb
Yes
Program: Express 103 PN120598 (V 1.00)
ID #1 (disabled) Start O Refill Cmpt
ID #2 (disabled) Resume O Disp Cmpt
Single-Speed (enabled) Reset O Slow Cycle
Auto Print (disabled) Stop O Disp Slow
Delay After Discharge (sec) 3.0 Refill Disp Fast
Setup Menu