Rice Lake 920i FlexWeigh Systems - 103 - Manual (Page 7)

Operation Menu Softkeys 3
1.3 Operation Menu Softkeys
Operation Menu softkeys are defined to provide flexibility of operator functions for specific applications. Softkey
assignments are listed on the tabs shown at the bottom of the LCD display and softkey functions are activated by
pressing the arrow keys below the softkey tabs (Figure 1-1). They are password protected and offer access to the
following:
• Setup
• Totals
• Presets
• ID #1
• ID #2
Figure 1-1. 920i Front Panel
The softkeys shown on the display are determined by the indicator configuration and program.
Softkey Default Softkey Description
Time/Date Current Time/Date Time and date of 920i
System Password """"""" Setup Password Changing the password that is required for entry into
the setup menu. Setting the password to nothing will
cause the system to not prompt for a password
when the Setup Menu softkey is pressed.
Enabling/Disabling ID#1 - ID #1 This allows the operator to log an extra data field. A
softkey will appear on the main screen to allow the
operator to enter more data (ie: formula, ID Truck,
container, operator)
Enabling/Disabling ID#2 - ID #2 This allows the operator to log an extra data field. A
softkey will appear on the main screen to allow the
operator to enter more data (ie: formula, ID Truck,
container, operator)
Dispensing Speeds Single Speed Single, Dual or Parallel Allows the operator to change the dispense speed
operations
Auto Tare Feature Enabled Auto Tare Enabled/Disabled Allows the operator to enable/disable the auto tare
feature
Auto Print Feature Enabled Auto Print Enabled/Disabled Allows the operator to enable/disable the auto print
feature
Delay After Discharge - Delay After Discharge Allows the operator to enter a time in seconds to
delay after completion of Discharge before a new
Start input is enabled.
Table 1-1. Configurable Softkeys
PRINT UNITS
PRESETS ID1 ID2 SETUP MENU