Rice Lake 920i FlexWeigh Systems - 103 - Manual (Page 5)

Safety 1
1.0 Introduction
This manual is intended for use by service technicians and operators responsible for installing and operating the
Flexweigh System 103 Loss-in-Weight Controller. Additional information on the actual hardware features of the
920i are explained in the 920i Installation and Operation manual (PN 67887) and is included with this product.
1.1 Safety
Safety Symbol Definitions:
Indicates a potentially hazardous situation that, if not avoided could result in serious injury or death, and
includes hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided may result in minor or moderate injury.
Indicates information about procedures that, if not observed, could result in damage to equipment or
corruption to and loss of data.
Safety Precautions
Do not operate or work on this equipment unless you have read and understand the instructions and
warnings in this manual. Failure to follow the instructions or heed the warnings could result in injury or
death. Contact any Rice Lake Weighing System dealer for replacement manuals. Proper care is your
responsibility.
General Safety
Failure to heed may result in serious injury of death.
Some procedures described in this manual require work inside the indicator enclosure. These procedures are to be
performed by qualified service personnel only.
DO NOT allow minors (children) or inexperienced persons to operate this unit.
DO NOT operate without all shields and guards in place.
DO NOT step on the unit.
DO NOT jump on the scale.
DO NOT use for purposes other then weight taking.
DO NOT place fingers into slots or possible pinch points.
DO NOT use any load bearing component that is worn beyond 5% of the original dimension.
DO NOT use this product if any of the components are cracked.
DO NOT exceed the rated load limit of the unit.
DO NOT make alterations or modifications to the unit.
DO NOT remove or obscure warning labels.
Before opening the unit, ensure the power cord is disconnected from the outlet.
Keep hands, feet and loose clothing away from moving parts.
1.2 Overview
The Flexweigh 103 Loss-in-Weight Controller is designed for applications where a preset target weight is
repeatedly dispensed from a tank or a hopper scale. The system maintains weight within high and low limits to
guarantee enough content for a complete dispense cycle. Press Start and the system automatically tares the scale,
begins the loss-in-weight dispense, and stops as programmed-all while transmitting and storing the accumulated
weight totals.
WARNING
CAUTION
Important
WARNING