Rice Lake 920i FlexWeigh Systems - 103 - Manual (Page 6)

2 System 103 Loss-in Weight Dispensing Controls
1.2.1 Standard Features
The System 103 comes with the following standard features:
• Wallmount NEMA 4Xstainless steel enclosure
• Pre-programmed and configured 920i HMI Indicator/Controller
• Front panel switches including E-Stop, Reset/Resume, Start
• Softkeys for presets, CN#, Alpha-numeric ID#1, Alpha-numeric ID#2, and Totals
• Built in safety interlocks prevent cycle start if not enough weight
• Accumulating subtotal and total registers
• Transmitted audit trail
• Digital I/O board
• Relay rack and SSR relay outputs
• Fast feed
• Slow feed
• Dispense complete (optional)
• Automatic Discharge
The iRite program and source code that make up the 920i Flexweigh 103 Loss-in-Weight Controller are
property of the manufacturer. Modifications to this program and equipment must be performed by Rice Lake
Weighing Systems.
For more information on the iRite compiler utility program, refer to the 920i Installation and Operation Manual (PN 67887)
and is included with this product.
Note