Rice Lake 920i FlexWeigh Systems - 103 - Manual (Page 15)

Test Digital IO 11
2. Press the Delay After Discharge softkey to access that softkey.
Figure 3-10. Enter Time
3. Enter in the time in seconds to delay the discharge time.
3.8 Test Digital IO
1. Cycle through pressing the More => softkey to access the third setup menu screen which includes the Delay
After Discharge softkey.
2. Press the Test Digital IO softkey to test the Dispense Complete, Slow Dispense and Fast Dispense relay
outputs.
Figure 3-11. Test Digital I/O
Dispense Complete
Press the Dispense Complete softkey to test the digital I/O.
Slow Dispense
By pressing the Slow Dispense softkey, the digital I/O is tested and the Slow Dispense icon on the setup menu
screen is darkened while it’s being tested. Press the Slow Dispense softkey again and the icon clears again.
Fast Dispense
By pressing the Fast Dispense softkey, the digital I/O is tested and the Fast Dispense icon on the setup menu screen
is darkened while it’s being tested. Press the Fast Dispense softkey again and the icon clears again.
05/20/2011 02:19PM SCALE #1
Cancel End
Enter Delay After Disch (sec)
=> 3.0
_ _ _ _ _
SCALE #1
Gross
Lb
Home
Program: Express 103 PN120598 (V 1.00)
ID #1 (disabled) Start O Refill Cmpt
ID #2 (disabled) Resume O Disp Cmpt
Single-Speed (enabled) Reset O Slow Cycle
Auto Print (disabled) Stop O Disp Slow
Delay After Discharge (sec) 3.0 Refill Disp Fast
Setup Menu
05/20/2011 02:15PM SCALE #1
Test
Digital IO Exit
Setup Menu
_ _ _ _ _
SCALE #1
Gross
Lb
<= More
Program: Express 103 PN120598 (V 1.00)
ID #1 (disabled) Start O Refill Cmpt
ID #2 (disabled) Resume O Disp Cmpt
Single-Speed (enabled) Reset O Slow Cycle
Auto Print (disabled) Stop O Disp Slow
Delay After Discharge (sec) 3.0 Refill Disp Fast
Setup Menu