Rice Lake DWM-IV Weighmeter Standard Operators Manual - Manual (Page 30)

F1.8 Output Options
d - Neither of the following options installed.
1 - Analog output card installed.
2 - BCD output card installed.
F1.9 High Resolution Enable
d - Minimum four raw counts per digit.
E - Minimum one raw count per digit.
FSE F2
F2.0 Tare Enable
d - Tare disabled.
E - Tare enabled.
F2.1 Tare Interlock
d - Tare may be changed at any weight indication.
E - Weight must be at zero to clear tare.
F2.2 Auto Clear Tare
d - Not Active.
E - Tare will automatically clear when indication returns to less than 10 positive digits of
zero and no motion.
F2.3 Ten Tare Look -Up
d - Provides single tare register.
E - Enables ten register tare look-up.
F2.4 Battery Option Enable
d - Battery backed option not installed.
E - Battery backed option installed.
Page 28