Rice Lake DWM-IV Weighmeter Standard Operators Manual - Manual (Page 41)

Programming Steps Summary
Record the final settings for each step in the boxes ([ ]) below for future reference.
[ ]F1.0 Raw Counts Display Enable
[ ]F1.1 Digital Averages
[ ]F1.2 Display Update Rate
[ ]F1.3 Motion Limit in Digits
[ ]F1.4 Auto Zero Tracking Enable
[ ]F1.5 Auto Zero Tracking Width
[ ]F1.6 2 % Zero Range Enable
[ ]F1.7 Key Functions Enable
[ ]F1.8 Output Options
[ ]F1.9 High Resolution Enable
*[ ]F1.A
*[ ]F1.B
*[ ]F1.C
*[ ]F1.D
[ ]F2.0 Tare Enable
[ ]F2.1 Tare Interlock
[ ]F2.2 Auto Clear Tare
[ ]F2.3 Ten Tare Look -up
[ ]F2.4 Battery Option Enable
[ ]F2.5 Stand-By Mode Enable
[ ]F2.6 External Gross Net Enable
Page 39