Rice Lake DWM-IV Weighmeter Standard Operators Manual - Manual (Page 49)

0 1 1 XXXX.XX
1 0 0 XXX.XXX
1 0 1 XX.XXXX
4. Print Key = 1 if front panel PRINT key is being pressed.
5. Relay = 1 if relay energized.
6. Each Status Word is comprised of two ASCII hex characters (‘0’ - ‘9’, ‘A’ - ‘F’),
representing the two 4-bit patterns that make up each Status Word. Example: 5 1 in
the Status B position would be bit pattern 0101 0001 = count by .2 and print button
pressed.
E) Time/Date Format
12 Hour
Time Date
H H : M M A S M M - D D - Y Y S
P S P
24 Hour
Time Date
H H : M M S M M - D D - Y Y S
P P
F) Totals Format
Where 'x' represents the totals register number currently selected. If checksum is
enabled, it is inserted before a CR-LF sequence.
G) ID Number
H) Consecutive Number
Page 47