Rice Lake OnTrak Truck Scale Data Management - Operation Manual - Manual (Page 13)

Setting up OnTrak 9
13. Use the text boxes to enter the weight threshold that indicates that a truck is on the scale, and the
maximum amount of time (in seconds) to wait for a value to be entered.
Figure 3-2. Automated Kiosk settings.
14. Under Application , select Shipping/Receiving .
15. From the Transaction Mode pull-down menu, select whether you want Shipping or Receiving to be the
default transaction mode. This will determine which is selected automatically with each new transaction.
16. Using the radio buttons, select which mode will be used to calculate charges. Select Shipping if you
charge for product leaving your facility (i.e., quarry); Receiving if you charge for product entering your
facility (i.e., landfill). The radio buttons are shown in Figure 3-3.
Figure 3-3. Shipping/Receiving radio buttons.
17. Under Application , select Weigh Screen .
18. Mark or unmark checkboxes to customize the appearance of the weigh screen.
Figure 3-4. Weigh-out screen options.
19. Under Application , select Weigh Screen Overrides .
20. Mark or unmark checkboxes to customize settings.
21. Under Application , select User Defined Transaction Fields .
22. Use the text boxes to label any user defined fields. Mark the checkbox to prompt for data on inbound and
outbound weighments.
23. When all application settings are set as desired, click Save .