Rice Lake OnTrak Truck Scale Data Management - Operation Manual - Manual (Page 9)

Starting OnTrak 5
2.0 Starting OnTrak
OnTrak can be launched from the following location: Start » Programs » Rice Lake Weighing Systems » OnTrak .
2.1 Operating Modes
OnTrak has two modes of operation. The available functions differ depending on which mode you are logged
in to.
Administrator mode
Administrator mode allows full control of OnTrak . Many of the features described in this manual may require you
to be in administrator mode. The default login (case-sensitive) for the administrator is shown in Table 2-1.
2.2 User Mode
If you are logged in as a user, you only have access to make weighments and add transient trucks. You cannot
modify the
OnTrak database nor view reports.
2.3 The OnTrak Screen
Figure 2-1. OnTrak ’s main screen.
User name Administrator
Password password
Table 2-1. Default Administrator login.
Virtual Indicator
Toolbar
Menu bar
Truck, Job, Customer,
and Product Selections
Trucks that have been weighed in, but not weighed out, appear in this section.
Weigh button performs weigh-ins and weigh-outs
Select one and click the Weigh button to weigh out.
Select Shipping or Receiving Transaction Mode
Red light means load is stable