0 making weighments, 1 automated kiosk mode, Making weighments – Rice Lake OnTrak Truck Scale Data Management - Operation Manual User Manual
Page 32
28
OnTrak Manual
5.0
Making Weighments
Weighments in
OnTrak
can be made manually through the program’s main screen. Here, you can select whether
you are in shipping or receiving mode, as well as the truck, job, customer, and product. Refer to Section 3.1 on
page 8 for instructions on shipping and receiving modes.
Figure 5-1. OnTrak
main screen.
5.1
Automated Kiosk Mode
Weighments can automatically be made by enabling automated kiosk mode. First, automated kiosk mode must
be configured (see Section 3.1 on page 8), then it can be enabled on scale one, scale two, or both. To enable
automated kiosk mode,
1. From the
Tools
menu, select
Options.
..
The
Options
dialog box appears.
2. Display the
Scale One
or
Scale Two
options by double-clicking the folder.
3. Under
Scale One
or
Scale Two
, click
Kiosk
. Ensure the correct communications method is specified, as
well as the printer driver and Windows printer name. Mark the
Enable Automated Kiosk
checkbox.
Virtual Indicator
Toolbar
Menu bar
Truck, Job, Customer,
and Product Selections
Trucks that have been weighed in, but not weighed out, appear in this section.
Weigh button performs weigh-ins and weigh-outs
Select one and click the Weigh button to weigh out.
Select Shipping or Receiving Transaction Mode
Red light means load is stable