Rice Lake Datamax-ONeil I-Class Printer - Manual (Page 115)

I-Class 105
Printing Specifications (continued)
Print Length Range:
with an optional cutter:
with an optional peel &
present mechanism:
.25” – 99” (6.4 mm – 2514.6 mm) I-4206, I-4208,
I-4212, I–4308
.25” – 84” (6.4 mm – 2133.6 mm) I-4406
.25” – 55” (6.4 mm – 1397 mm) I-4604
1.25” – 99” (31.8 mm – 2514.6 mm) I-4206,
I-4208, I-4212, I–4308
1.25” – 84” (31.8 mm – 2133.6 mm) I-4406
1.25” – 55” (31.8 mm – 1397 mm) I-4604
1.50” – 99” (38 mm – 2514.6 mm) I -4206,
I-4208, I-4212, I–4308
1.50” – 84” (38 mm – 2133.6 mm) I-4406
1.50” – 55” (38 mm – 1397 mm) I-4604
Print Justification: Left
Flash Memory: 1 MB I-4206, I-4208
2 MB I-4212, I–4308, I-4406, I-4604
SDRAM Memory: 8 MB I-4206, I-4208
16 MB I-4212, I–4308, I-4406, I-4604
7.1 Media and Ribbon Requirements
Media Types: Roll-Fed, Die-Cut, Continuous, and Fan-Fold. Flat
on the printable side with no more than .0007”
(.018 mm) protrusions on the opposite side.
Media Roll Capacity * : 8” (203 mm) outer diameter
Media Core: 1.5” or 3.0” (38 mm or 76.2 mm) inner diameter
Ribbon Core: 1.010” .006” (25.6 mm .2 mm) inner diameter.
Core not to protrude beyond ribbon edge.
Ribbon Width Range ** : 1.0” – 4.5” (25.4 mm – 114.3 mm)
Ribbon Length ** : 1968’ (600 meters) maximum
* Wound out labels only.
** Coated side ‘in’ or ‘out’ are NOT interchangeable, but dependent upon the Ribbon
Supply Hub type. Also, the ribbon width should slightly exceed label width (including
the backing material) to protect the printhead.