Rice Lake Datamax-ONeil I-Class Printer - Manual (Page 44)

34 I-Class
4.1 The Menu System
Printer operation can be controlled through the user interface, allowing the
operator access to these six menu system branches:
Media Settings
Print Control
Printer Options
System Settings
Communications
Diagnostics
While in the menu system, the current selection will be indicated with an
asterisk (*) next to the displayed item on the LCD. Selections designated with a
section symbol (§) will require a printer reset before becoming effective. A reset
will be automatically invoked when exiting the menu system and answering
‘Yes’ to the ‘Save Changes’ prompt. Changes made will be saved. When power
is removed, the new settings will be restored upon power-up.
The same functional commands from your host computer may, in some cases,
override the printer’s menu settings. In addition, as a security feature for the
prevention of accidental or unauthorized changes, the menu system has a
password protection feature.
; Note: In the following subsections, the factory default settings are denoted
with the ‘—’ symbol. Selections denoted with a diamond ( ) can only
be changed through the menu system - all other selections can be
overridden by host software commands. Consult the I & W Class
Programmer’s Manual for specific information.