Rice Lake Datamax-ONeil I-Class Printer - Manual (Page 59)

I-Class 49
System Settings (continued)
; Note: As indicted, the following menu selections will only appear according
to the model of your printer.
ALLEGRO EMULATION This instructs the firmware to process
specific DPL data as would the
Allegro
® printer without all of the
variations.
ENABLED The row position is calculated based
on 194 DPI.
Lines and boxes: Rotations 2 and 4
are affected by the vertical multi-
plication factor defined in the DPL
Dxx command.
Column positions greater than the
printhead width are adjusted back to
the printable area and printed.
— DISABLED The above exception is disabled.
I-4206, I
-4208,
&
I
-4212
M
ode
ls
DPI EMULATION For users who want to print DPL files
intended for a 203 DPI printer.
— DISABLED Label formats interpreted as intended
for 406 DPI.
203 DOTS PER INCH Label formats interpreted as intended
for 203 DPI.
I-4406 M
ode
l
DPI EMULATION For users who want to print DPL files
intended for a 203 or 300 DPI printer.
— DISABLED Label formats interpreted as intended
for 600 DPI.
300 DOTS PER INCH Label formats interpreted as intended
for 300 DPI.
203 DOTS PER INCH Label formats interpreted as intended
for 203 DPI.
I-4604 M
ode
l